| Course title | |||||
| 機械システム設計製図 [Mechanical Systems Design and Drawing] | |||||
| Course category | technology speciality courses,ets. | Requirement | Credit | 1 | |
| Department | Year | 3～4 | Semester | 3rd | |
| Course type | 3rd | Course code | 023540 | ||
| Instructor(s) | |||||
| 西山 紀久雄 [NISHIYAMA Kikuo] | |||||
| Facility affiliation | Graduate School of Engineering | Office | Email address | ||
| Course description |
|
The purpose of this lecture is to support the "Image of Manufacture" of necessary for an engineer by understanding and practice of mechanical drawing way based on Japanese industrial Standards (JIS) and knowledge an actual application of this way in the production site. The lecturer of this course has the firsthand experiences on design and drawing in various corporates, and will describe actual examples from industry for case-studies, analyses and discussion. |
| Expected Learning |
|
On successful completion of this lecture. 1. Drafting by drawing instrument 2. View point of mechanical drawing 3. Relationship between precision and inspection 4. Understanding of datum face 5. Difference of roundness and cylindricity, difference of concentricity and run-out 6. Drawing method to achieve the realization of the required machine element function 7. Material and machining procedure and precision 8. Understanding of the welding structure 9.Calculation of the intensity |
| Course schedule |
|
Friday Oct.4 Explanation and notation of course curriculum(The first chapter of the text) ○Basic of drawing Drafting to use a drafter and drawing instruments [ Polygon] Friday Oct.11 ○Projection, Some expressions of the figure (The second chapter of the text) Projection method ,sectional view, viewpoint of drawing [Bolt/nut] Friday Oct.18 ○Expression of the dimension, surface roughness and dimensional toｌerance (The 3rd, 4th, 5th chapter of the text) Cross point of lines,sequence of drafting, viewpoint of drawing,required function Directions method of the surface roughness The relationship of the dimensional tolerance and fitting. Friday Oct.25 ○Geometrical tolerance and standard tolerance(The 6th chapter of the text) Datum, datum feature, simulated datum feature, the precision and required function Friday Nov.1 ○Screw, bolt, nut and shaft, key (The 7th, 8th chapter of the text) Bolt strength, division of bolt strength, some kinds' screw Bolt/nut drafting Friday Nov.8 ○The sectional drawing and part item drawing of Plummer block [Plummer block] Friday Nov.15 ○Bearing and welding(The 9th and 11th chapter of the text) Selection of the ant-friction bearing Life calculation of the ant-friction bearing Plane bearing and sealing Symbol of the welding Friday Nov.22 Structural calculation with strength calculation and design of the gear box ［Gear box］ Friday Nov.29 Same as above Friday Dec.6 Same as above Saturday Dec.7 Same as above Friday Dec.13 Same as above Friday Dec.20 Same as above Friday Jan.10 Same as above Friday Jan.24 Same as above |
| Prerequisites |
| Students who attend less than 70% of this course can not get this credit. |
| Required Text(s) and Materials |
| Published by Hirotsugu compilation "useful mechanical drawing" Asakura Bookstore Co., Ltd. |
| References |
| Assessment/Grading |
| A person of the lack present, design check and drawing non-presentation is unacceptable. Homeworks are considered. |
| Message from instructor(s) |
|
Because the lecture contents range over a variety in limited time. The student's preparation is necessary. |
| Course keywords |
| Office hours |
| Remarks 1 |
|
Bring a drafting appliance, a drafting paper (A3), and the writing instrument. Bring the electronic calculator The mechanical pen cores of the diameter 0.5 and hardness H and HB |
| Remarks 2 |
| There may be the change of curricula and the change of contents. |
| Related URL |
| Lecture Language |
| Language Subject |
| Last update |
| 6/4/2019 7:46:45 PM |